This Xtream Editor Complete Setup should take no more that 15-20 Minutes to complete but its worth the effort to get IPTV Bouquets with full  EPG so its exactly like your current Bouquets and once its done you wont have to do anything again.

You will have 2 choices for STEP ONE, you can either do it by USB or by FTP….  Both ways are below so please choose which one suits you best and when you have completed STEP ONE of your choice then go to STEP TWO

 ————————————————————————————————————————————————-

STEP ONE INSTALLING VIA USB –  Downloading and installing the xtream editor ipk file Via Usb

1. Go to this link to download the xtream editor enigma 2 plugin http://xtream-editor.com/files/enigma2-plugin-extensions-xtreameditor.zip

2. Once you have downloaded the plugin and unzipped it, you will then have 2 files, we only need one of the files which is enigma2-plugin-extensions-xeaio_3.0.9_all.ipk

3. Place the file called enigma2-plugin-extensions-xeaio_3.0.9_all.ipk onto a usb ( usb must be formatted to FAT 32 )

4. Its important to make sure your Sat/Cable Box is connected to the internet at this point so the installation of the app can register with xtream to generate a valid app code

5. Plug the usb into the front/side usb port of your box

6. Press Menu> Plugins and then go to Media Scanner. Now select medium to be scanned which will be your USB which you placed the ipk file on.

( Wooshbuild users may not have media scanner and may have to use DreamExplorer )

7. Select install extensions and place a tick in the enigma2-plugin-extensions-xeaio_3.0.9_all.ipk  file

8. Once you have placed the tick next to the file, press green to install. Once installed press ok and exit out of the menus

9. Restart your Box and then go to  STEP TWO – Configuring xtream editor

 ————————————————————————————————————————————————-

STEP ONE INSTALLING VIA FTP –  Downloading and installing the xtream editor ipk file Via FTP

1. Go to this link to download the xtream editor enigma 2 plugin http://xtream-editor.com/files/enigma2-plugin-extensions-xtreameditor.zip

2. Once you have downloaded the plugin and unzipped it, you will then have 2 files, we will only need one of the files which is enigma2-plugin-extensions-xeaio_3.0.9_all.ipk

3. If you don’t already have it installed then download filezilla client onto your computer so you can FTP enigma2-plugin-extensions-xeaio_3.0.9_all.ipk  file to your Sat Box. Get it here https://filezilla-project.org/download.php?show_all=1 and install it on the computer when it’s downloaded.

4. Make sure your Sat Box is connected to the internet and then get your Sat Box‘s IP address by pressing menu on your box’s remote control and selecting information and then network information. Your Sat Box`s IP will be there, usually starts 192.168.x.x.

5. Open filezilla on your computer and where it says host you need to put in the IP address you just got from your Sat Box. Where it says username you put the word root. Leave the password box blank and in the port box put the number 21 then click connect.

6. Once connected in filezilla browse to the volatile/tmp folder and place the enigma2-plugin-extensions-xeaio_3.0.9_all.ipk file in there

7. Its important to make sure your Sat/Cable Box is connected to the internet at this point so the installation of the app can register with xtream to generate a valid app code

8. If your using Vix Image – Menu> Setup> Vix> Install Local Extension, then select the ipk and press green to install. Once installed, press ok and exit out of the menus.

If your using Wooshbuild / IPab / OpenATV Image – Press Blue and select install ipk installation

9. Restart your Box and then go to  STEP TWO – Configuring xtream editor

  ————————————————————————————————————————————————-

STEP TWO – Configuring xtream editor

1. If you have AutoBouquetsMaker installed then do the following, if its not installed then go to number 2 below.

Go to Menu> Setup> Service Searching> AutoBouquetsMaker> Configure

Make sure “Keep all non-ABMbouquets” is set to yes ( This will stop Autobouquetsmaker from overwriting your IPTV Bouquets, so this is important )

Where it says “Place Bouquets at” – If you want your Bouquets first on the list then select Top, If you want your IPTV Bouquets first on the list then select Bottom,

Now click Green to save these settings and Exit all menus

2. Press green to go to your plugins and open the xtream editor plugin

3. Auto Import should be set to enable,

When in deep standby should be set to Wake up and import,

Import Bouquets every hour can be enabled,

Start Import after booting up should be disabled,

Always reload VOD when Opening should be disabled,

Disable VOD Plugin depends on whether your provider has VOD or not, IPTV Player should be IPTV (4097), VOD player should be the same.

Import EPG should be enable,

Import Picon should be enabled, TV- Archive Offset should be 0

4. Note down the app code thats on the right hand side in xtream editor , its in capital letters and numbers ( You will need to email this to your provider )

5. Your Provider will let you know when it is set up Then…..

6. In xtream editor on the box Press Yellow to Get Settings, now the Line ID should populate with the Line ID.

7. Click Blue to Load, After a few seconds you will get a message saying Done! The Bouquets were loaded, and then events will start Importing ( it will go from 0 and start rising )

8. Wait for it to finish first time import of the EPG, this will take a few minutes

9. Click Green to Save

You can now go to your Bouquets

Depending on how you configured things, the IPTV Bouquets will start at the end of your Existing Bouquets or before them, IPTV Bouquets.

The EPG in your IPTV Bouquets for the Channels should also be populated.

All Done.

TROUBLESHOOTING

APP CODE Does Not Exist – If you get this message when you are linking App Code with the Line ID on xtream editor website you must have installed the xtream editor app with no internet connection to the box so it didnt register the app code on website.

Fixing This Issue – What you need to do is make sure the box has an internet connection then go back into xtream editor plugin on the box and click menu on the remote, then click reset config to generate a new App Code. Now you can link the new App Code thats been generated with the Line ID on the website and go to Step Two , Number 7.

For Future Reference Regarding The EPG – If your EPG ever disappears or has blanks on the  main channels in the future you should do the following

Reboot your box first to clear old cache , once rebooted got to menu>plugins and open xtream editor

In xtream editor you can then click blue to re-download the bouquets and import the epg again and once completed click green to save

Your EPG should be good again.

Xtream Editor Plugin On Other Devices:     X3M Player